HJ-Dental
E-mail:hj.dentalsale@gmail.com
DENTAL PLASTER MODEL TRIMMER JT-19
Features:
Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap; Open the valve
Connect the waste-disposal tube to the unit
Connect the power cordand switch on the power switch (O=offl=on).
When brakingit is normal to hear clicking before the sand tablet stops.
If the sand tablet makes unusually loud noisesremove itand use the included hex-wrench to adjust the screw on the back cover (18)
To check if you need to replace the abrasive diskrotate the disk by hand and estimate: If the platform jumps more than 2mmchange the disk. After replacing the diskmake sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet).
Specifications
Voltage: A)220V/50Hz ± 10%
B)110V/60Hz± 10%
Power: 500W
Rotate speed: 2800RPM
Dimensions: 44x35x35cm
you may want……
Seayang Handpiece BM50S1 + Control unit Multi 600 (brushless)
Team of HJ-Dental
JNBP-3 PEN TYPE SAND BLASTING MACHINE (TWO-PEN)
Dental Ball Type Arch Trimmers JT-37
DENTAL PLASTER MODEL TRIMMER JT-19
Korea Seayang Micromotor H37L1 + Marathon-3
JNJT-9 Technician Table
Dental Argon-arc Welding System
Automatic Programmable Vacuum Porcelain Furnace: Natural 1G and 2G
|
|
|
|
|
|
|
|
|
|
|
|
